Roof Bolt Bits

PDC roof bolt bit origins

In 1998, JINGWEI founder Yang Gang invented the PDC roof bolt bit, advancing bolt-and-mesh support in coal mining. JINGWEI reports that its adoption helped mitigate three major mine-safety hazards and reduce accident rates by over 93%.

Original PDC roof bolt bit view 1 Original PDC roof bolt bit view 2

Original drill bit · two views

Patent No. CN3158856D · 6 September 2000

About Yang Gang

JINGWEI 金矛® vs. carbide drill bits

In long-term comparative tests, Jingwei 金矛® roof bolt bits maintain stable performance and long service life in complex coal formations, improving drilling efficiency and cost-effectiveness.

JINGWEI 金矛® roof bolt bits
20×
Conventional carbide drill bits
1×

Reference index: carbide = 1×. Actual service life depends on formation, drilling parameters and operating practice.

Half-Cutter Roof Bolt Bit

Half-Cutter Roof Bolt Bit

Highly wear-resistant PDC cutters retain sharp edges, significantly improving drilling efficiency in medium-hard rock. Lower drilling resistance and operating costs than full-cutter bits, with smoother cuttings removal.

<p>DIAMETER RANGE
Φ25 / 27 / 28 / 29 / 30 / 32 / 42 mm
CONNECTION
Matched to your assembly
FORMATION / OPERATING CONDITIONS
Standard ≤8 · Enhanced ≤12 · Ultra ≤16</p>
  1. 01 Lower drilling resistance; lower operating costs than full-cutter bits
  2. 02 Sharp, wear-resistant cutters
  3. 03 Smooth cuttings removal
Discuss this product

Full-Cutter Roof Bolt Bit

Full-Cutter Roof Bolt Bit

Two blades with full-round cutters provide continuous cutting and high impact resistance in hard, fractured rock. Smooth starts and restarts produce round holes with low deviation for efficient coal-mine bolt-and-mesh support.

<p>DIAMETER RANGE
Φ25 / 27 / 28 / 29 / 30 / 32 / 42 mm
CONNECTION
Matched to your assembly
FORMATION / OPERATING CONDITIONS
Standard ≤10 · Enhanced ≤12 · Ultra ≤16</p>
  1. 01 Continuous, stable cutting
  2. 02 High impact resistance
  3. 03 Fewer replacements
Discuss this product

Three-Wing Roof Bolt Bit

Three-Wing Roof Bolt Bit

Designed for high-torque hydraulic rigs, roof bolters and bolter miners. Balanced three-blade loading reduces bit bounce and hole deviation. Four flushing ports and large cuttings channels support smooth drilling and gauge retention.

<p>DIAMETER RANGE
Φ28 / 29 / 30 / 32 / 42 mm
CONNECTION
Matched to your assembly
FORMATION / OPERATING CONDITIONS
Ultra: f ≤ 16</p>
  1. 01 Based on coal-mine roof bolt bit technology invented by our founder
  2. 02 More even loading across three blades; stable drilling with reduced bit bounce
  3. 03 Reliable hole completion and higher sustained drilling efficiency
Discuss this product

Model-to-Formation Match

Drill Bit Selection & Application · Protodyakonov coefficient (f)

BIT TYPE / GRADESelect by ground conditions
Soft rockCoal, mudstone, soft shale, soft sandstone
Medium hard to hard rockSandy shale, sandstone, relatively strong limestone
Hard to very hard rockStrong sandstone, dense limestone
Very hard to extremely hard rockHigh-strength quartz sandstone, strong limestone
Ultra-hard rockDense quartzite, basalt
1234567891011121314151617181920
f RANGE
Half-Cutter Roof Bolt BitStandard
f ≤ 8
Half-Cutter Roof Bolt BitEnhanced
f ≤ 12
Half-Cutter Roof Bolt BitUltra
f ≤ 16
Full-Cutter Roof Bolt BitStandard
f ≤ 10
Full-Cutter Roof Bolt BitEnhanced
f ≤ 12
Full-Cutter Roof Bolt BitUltra
f ≤ 16
Three-Wing Roof Bolt BitUltra
f ≤ 16
TYPICAL APPLICATIONS

Roof bolting and mesh support in coal-mine roadways.

Find the Right Tools
for Your Ground Conditions

Share your application and specifications. Our engineering team will support product selection.

Request a Quote

Contact JINGWEI

WECHAT Jwgroup008

WHATSAPP +1 3158320409

No. 70 Jiushi Road, Baqiao District
Xi’an, Shaanxi, China