PDC Cutters
JINGWEI has developed PDC cutters in-house since 2003, earning multiple patents.
Explore cutter profiles ↓
Cutter construction
Polycrystalline diamond compact (PDC) cutters are produced by sintering diamond powder onto a cemented tungsten carbide substrate at 100,000 atm and 1,500 °C. The diamond table provides a hard, wear-resistant working face; the carbide substrate supports it and provides a base for attachment.
- 100,000 atm
- Sintering pressure
- 1,500 °C
- Sintering temperature
01 / Diamond table
A polycrystalline diamond layer formed by high-pressure, high-temperature (HPHT) sintering. It provides the hard, wear-resistant working surface that contacts and breaks the rock.
02 / Non-planar interface
A shaped boundary between the diamond table and carbide substrate, designed to increase interfacial area and manage stress distribution.
03 / Tungsten carbide substrate
A tough cemented carbide base that supports the diamond table and provides a surface for brazing the cutter into the drill bit.
PDC grades
Jingwei offers Standard, Enhanced and Ultra PDC grades. Diamond powder blends, interface geometry and sintering parameters are tailored to meet different requirements for wear resistance and impact resistance.nSelect the cutter grade to match formation abrasivity, impact loading and operating conditions.nJingwei PDC drill bits can be configured with Standard, Enhanced or Ultra PDC cutters, subject to bit design and application requirements.
Standard
Enhanced
Ultra
Cutter profiles
Compare cutting action, edge strength and suitable ground conditions.

01
Flat
A flat diamond face for efficient shearing; edge preparation and PDC grade determine application fit.

02
Chamfered flat
Chamfer size and angle balance cutting aggressiveness and edge strength; geometry can be customized.

03
Large-chamfer flat
A larger chamfer protects the edge against chipping but may require higher cutting loads.

04
Domed
A rounded working face for impact or interrupted loading; selection also considers cutting aggressiveness.

05
Truncated-cone
A flat-topped, tapered profile; face size, taper and cutter orientation determine rock contact.

06
Chamfered truncated-cone
A truncated-cone profile with added chamfering to tailor edge contact to the application.

07
Tri-ridge
Three ridges combine localized crushing and shearing; performance depends on geometry and formation.

08
Cloverleaf
A lobed profile with multiple rock-contact regions; geometry and orientation shape the cutting action.

09
Ridge
A raised ridge concentrates rock loading for crushing and shearing; application depends on bit design.
Application & Customization
Chamfer size and angle can be tailored to balance cutting aggressiveness and edge strength. Cutter profile, PDC grade and bit layout are selected together for coal seams, interbedded formations, highly abrasive formations and other challenging ground conditions, with operating conditions also considered.
Coal seams
Interbedded formations
Highly abrasive formations
Find the Right Toolsnfor Your Ground Conditions
Share your application and specifications. Our engineering team will support product selection.
Request a QuoteContact JINGWEI
info@jwminingtools.comWECHAT Jwgroup008
WHATSAPP +1 3158320409
No. 70 Jiushi Road, Baqiao District
Xi’an, Shaanxi, China