Choose by cutting condition.
FEATURED 01 / WEAR SERIES
SharkDiamond® C-Wear Coal Pick
Wear resistance to reduce cutting wear and pick consumption.
APPLICATION & FIT
- Coal Seam
- Highly abrasive coal seams
- Operating Conditions
- Continuous coal mining
- Type
- U170
- Shank Diameter
- 43mm (1.70″) / 35mm (1.37″)
Formation hardness: f ≤ 10
Discuss this productAnatomy
* Actual performance varies with formation conditions and operating parameters.
- 01PCD TIP
- 3.5–10× wear life*Developed by JINGWEI.
- 02SPECIALIZED BRAZING
- Braze joint fill ratio ≥95%
- 03DIAMOND WEAR BUTTONS
- Abrasion ratio up to 50 × 10⁴Erosion and abrasive wear resistance.
- 04IMPACT-CUSHIONING STRUCTURE
- Optimized impact load transferIncreased overall strength.
- 0542CrMoA ALLOY STEEL BODY
- Special heat treatmentImpact toughness and bending strength.
FEATURED 02 / IMPACT SERIES
SharkDiamond® C-Impact Coal Pick
Impact resistance to reduce tip chipping and abnormal failure.
APPLICATION & FIT
- Coal Seam
- Coal seams with hard rock partings
- Operating Conditions
- High impact loads
- Type
- U170
- Shank Diameter
- 43mm (1.70″) / 35mm (1.37″)
Formation hardness: 8 < f ≤ 12
Discuss this productSELECTION REFERENCE
Compare the featured coal picks.
Compare formations, operating conditions and cutting priorities.
| SELECTION FACTOR | C-Wear | C-Impact |
|---|---|---|
| Coal Seam | Highly abrasive coal seams | Coal seams with hard rock partings |
| Formation Hardness (f) | f ≤ 10 | 8 < f ≤ 12 |
| Operating Conditions | Continuous coal mining | High impact loads |
| Selection Priority | Wear resistance | Impact resistance |
| Helps Reduce | Cutting wear and pick consumption | Tip chipping and abnormal failure |
| Cutting Tip | PCD · 30mm (1.18″) | Ultra-tough carbide · 40mm (1.57″) |
Hardness ranges overlap. Select by coal seam conditions and operating loads.
Coal Pick Series

C-Standard Type
hover to review
- Type
- U95
- Tip Type
- Ultra-tough carbide
- Tip Diameter
- 40 mm
- Wear Protection Type
- Diamond buttons
- Catalog No.
- J64-64-94-35-40MF

C-Standard Type
hover to review
- Type
- U95
- Tip Type
- PCD
- Tip Diameter
- 30 mm
- Wear Protection Type
- Carbide buttons
- Catalog No.
- J72-59-94-35-30ZH

C-Standard Type
hover to review
- Type
- U95
- Tip Type
- PCD
- Tip Diameter
- 30 mm
- Wear Protection Type
- Carbide hardfacing
- Catalog No.
- J70-59-94-35-30ZT

C-Standard Type
hover to review
- Type
- U47
- Tip Type
- PCD
- Tip Diameter
- 30 mm
- Wear Protection Type
- Carbide hardfacing
- Catalog No.
- J60-63-78-38-30ZT

C-Standard Type
hover to review
- Type
- U170
- Tip Type
- PCD
- Tip Diameter
- 30 mm
- Wear Protection Type
- Carbide buttons
- Catalog No.
- J70-69-132-35-30ZH

C-Standard Type
hover to review
- Type
- U95HD
- Tip Type
- Ultra-tough carbide
- Tip Diameter
- 40 mm
- Wear Protection Type
- Diamond Wear Buttons
- Catalog No.
- J64-64-94-35-40MF

C-Standard Type
hover to review
- Type
- U170
- Tip Type
- PCD
- Tip Diameter
- 30 mm
- Wear Protection Type
- Carbide hardfacing
- Catalog No.
- J70-69-132-35-30ZTS
Find the Right Tools
for Your Ground Conditions
Share your application and specifications. Our engineering team will support product selection.
Request a QuoteContact JINGWEI
info@jwminingtools.comWECHAT Jwgroup008
WHATSAPP +1 3158320409
No. 70 Jiushi Road, Baqiao District
Xi’an, Shaanxi, China